Five Crucial requirements for hospital doors

Push plates: Despite earlier mentioning that many hospital staff open the door in an unorthodox manner, it is still important to provide push plates to create an attractive focal point for entering personal. This encourages everyone to concentrate their contact with the door in one place, reducing grime to a single area that can be more easily cleaned. Consultants at Remax Doors often suggest adding stainless steel push plates on lighter coloured doors for this reason.

EZONG are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Preferably window choice will include double-glazed windows to assist with insulation. Good suppliers will also offer a window blind built into the glass of the window which provides privacy for hospital theatres when required but are sealed within the glass and will not harbour bacteria nor dust.

Clearly not every hospital has the same layout or the same budget. That's why it's important that the door you choose has a standard option and then offers particular features as add-ons (keeping in mind that some add-ons will preserve the life the door for longer, which reduces maintenance costs down the line. So although you may be saving money right now by avoiding add-ons, you may need to think about your maintenance budget in the future).

It is also important to ensure that your door is corrosion resistant, because corrosion will not only affect performance but also provide a perfect opportunity for contamination. This is largely the reason why hospitals and healthcare facilities use polymer and stainless steel for their hospital doors.

It's crucial that a hospital door's seal is not only airtight and resilient, but also has very little space in its construction for harbouring unwanted contaminants. The seal can be one of the places where buildup is most likely to occur, particularly because it is the contact surface that rubs against the floor and ceiling, but also because it is often made of rubber, which is more susceptible to residue buildup than either polymer or stainless steel.

Having the door on durable yet smooth mountings is another step. In fact, many hospitals rely on a quad-action opening mechanism, where double-hinged frames allow the door to open through 180 degrees each way. This means that traffic is equally unimpeded regardless of its direction.

The speed of a swing door depends on its weight, the resistance provided by the bearings, pressure and spring buffers on the door, and the force applied to open it. By keeping the weight to a minimum, you can immediately increase the door's opening speed.

Speed is crucial in a hospital, where decisions need to be lightning fast and response times can be the difference between life and death. That's why it's so important that every part of the hospital is designed for optimal speed and efficiency, while not compromising on hygiene or durability.

There are several steps that have to be connected to result in infection for SSIs. The initial introduction of microbial pathogens occurs most often during the surgical procedure performed in the Operating Theatre (OT), so it makes sense to assess this risk influenced by characteristics of the healthcare facility (amongst other characteristics) and by method of elimination, cut out all possible risks of harbouring pathogens including timber doors.

But polymer doors offer another significant advantage for hospitals: the added benefit for hygiene. Polymer panels have no gaps or joins and are impervious to moisture and acid petroleum products. This is crucial in a hospital where any chip in a timber door can create a harbourage for undesirable pathogens, and as we know, Surgical Site Infections (SSIs) are the second most common site of healthcare associated infections (HAIs)*.

Some polymer doors are even ultra high pressure filled, offering a density comparable to that of a timber door with an added, impressive thermal R-value of 3. These polymer doors can help save on air conditioning and heating bills throughout the hospital, as well as increasing efficiency and safety.

Strain injury was becoming a major concern at Ballarat hospital with their old, heavy timber doors. Troy even goes on to say that &#;there was a possibility we would have to decommission suites.&#; This shows how what may seem a minor concern can become a massive roadblock to the effectiveness of the hospital.

In a lot of cases, such as when nurses are wheeling beds, wheel chairs and trolleys through hospital doors, they travel backwards using their shoulder, heel or backside to push through the door. Even when travelling forward, opening a heavy door while also pushing, towing or carrying an item can be very difficult. This is something Equipment Manager, Troy, at St John of God, Ballarat Hospital identified as a major issue for his workplace.

The Joint Commission expects all staff affected by door locking to understand why the locking is required and how to unlock the doors in an emergency. The provision that when locking patients behind a door all staff carry keys to facilitate emergency egress is rooted in patient safety. History has shown that when doors are locked and staff did not have keys readily available, lives are lost. For example, 41 people lost their lives in a fire in Davenport, Iowa. The report stated that &#;due to the locked doors &#; and the lack of prearranged procedure for evacuation of the building in case of an emergency, it was possible to rescue only 25 of the 64&#;&#; Granted that this was many years ago, but the fact that locked doors contributed to a lack of rescue still occurs.

In healthcare, doors are locked for specific reasons, and under specific circumstances. Restricting access to areas like medication rooms or storage areas with hazardous materials (such as radiology and storing radioactive materials in the hot lab) are reasons for door locking. Protecting patients by locking units to restrict access, such as pediatrics or the obstetrical units often occurs. Restricting patient movement by locking patient rooms and egress from the unit, such as behavioral health care and Alzheimer&#;s units are other areas where doors are locked. In each of these settings specific criteria exists based on fire safety principles. In locked units all staff must carry the key to facilitate egress in an emergency; only authorized staff have keys to certain hazardous storage rooms like the hot lab in Radiology. Delayed-egress doors have a time delay before they open, allowing staff to respond to a patient attempting to elope or leave a unit without staff permission. Access-controlled doors restrict unauthorized people from gaining entry.

Staff carrying equipment may accidentally bump into equipment improperly stored in the egress corridor, causing injury or dropping the items being carried. Staff injuries may reduce effective staffing levels, cause discomfort to staff during healing, and possible compensation claims. Dropping equipment may be loud and disturbing to patients in the area, or damage the items being carried.

It should be noted that the Joint Commission allows crash carts to always be in the means of egress, as they are always in a stand-by mode. There is no requirement to have these plugged into receptacles that are also powered by the emergency generator, although this may be best practice. Isolation carts and Chemotherapy carts are also allowed in the means of egress while associated with a specific patient.

The Joint Commission and CMS, as authorities having jurisdiction who have adopted the National Fire Protection Association Life Safety Code, include enforcement is part of accreditation. CMS has adopted the NFPA codes by statute, which is why issues like compliance with the Life Safety Code is not an option but a requirement.

The &#;Safety Always&#; culture is where equipment and supplies have a designated safe place to be stored within the clinical units. The key to this is holding the clinical team accountable for making sure equipment and supplies &#;always&#; gets to the safe/appropriate destination. This also includes engagement from support staff who may visit the area/department to drop off supplies. One strategy that can be used to monitor and sustain this practice over time is to include a &#;daily storage report&#; at the team huddle or department meeting.

Corridor clutter can have a substantial impact on the health and safety of our patients and workforce. Additionally, healthcare employees who get injured on the job are less productive, less attentive, more susceptible to further injury, and may be less likely to deliver safe patient outcomes. Corridor clutter is a shared responsibility. Creating a &#;safety always&#; environment and minimizing known risks can advance employee health and safety while creating a safe environment to care for patients.

Staff carrying equipment may accidentally bump into equipment improperly stored in the egress corridor, causing injury or dropping the items being carried. Staff injuries may reduce effective staffing levels, cause discomfort to staff during healing, and possible compensation claims. Dropping equipment may be loud and disturbing to patients in the area, or damage the items being carried.

Often staff state that they cannot be bothered with putting equipment away, or that by leaving equipment in the corridor it is easily accessible later when it is needed. Nonetheless, this equipment, when left in the corridor, creates difficulty when moving patients during normal operations. When moving a patient from one location to another, it is difficult to turn the bed to avoid equipment. During an emergency, this becomes much more difficult. Not having to wheel a patient around equipment in the corridor has proven to save lives in emergencies.

Compliance with the Life Safety Code is not an option for your organization but a requirement. This code clearly requires the egress corridor to be clear and unobstructed. The Life Safety Code &#;establishes minimum criteria for the design of egress facilities so as to allow prompt escape of occupants from buildings, or where desirable, into safe areas within the building.&#; (NFPA 101-, 1.1.3) Healthcare buildings have established that an 8 foot wide corridor is optimal, allowing for two hospital beds coming and going to pass while transporting patients. This corridor must be clear to allow for this bed movement. Following de-briefing with clinical staff following catastrophic events, we often hear that staff with clear corridors were successful in rescue, but those that admitted corridor clutter shared the problems of trying to navigate around the equipment while trying to perform rescue.

Door handles in busy, &#;real life&#; high acuity clinical environments were variably contaminated with bacteria, and the number of bacteria found related to design, location, mode and frequency of operation. Largely ignored issues of handle and environmental design can support or undermine strategies designed to limit avoidable pathogen transmission, especially in locations designed to define &#;thresholds&#; and impose physical barriers to pathogen transmission between clinical areas. Developing a multidisciplinary approach beyond traditional boundaries for purposes of infection control may release hitherto unappreciated options and beneficial outcomes for the control of at least some hospital acquired infections.

We found a significant correlation between the frequency of movements through a door and the degree to which it was contaminated (p = <0.01). We further found that the door's location, design and mode of use all influenced contamination. When compared to push plate designs, pull handles revealed on average a five fold higher level of contamination; lever handles, however, displayed the highest levels of bacterial contamination when adjusted for frequency of use. We also observed differences in contamination levels at doors between clinical areas, particularly between the operating theatres and one of the ICUs.

Specifically, we sought to generate data relating to microbial contamination on door handles and how this might be related to factors relating to their design and use. We selected three high acuity environments for study as these are known to act as hotspots for HCAI transmission [6] . Finally, we suggest using relevant findings as evidence to generate novel strategies for infection control.

Healthcare Acquired Infections (HCAIs) continue to threaten the quality of patient care. The human and financial cost to individuals, healthcare organisations and society is considerable, approximating to £1.5bn per annum in the UK alone [1] . Governments and healthcare providers have intervened with a variety of measures, guidelines and regulations designed to control HCAIs [2] . Accordingly, much progress has been achieved with interventions relating to hand hygiene, strict infection control monitoring and cleaning regimes. Further progress is likely to follow from the identification of other potentially important contributors to HCAI, such as the design of the hospital itself and how this determines people's movement and behaviour within it [3] . There is increasing interest in the design of healthcare establishments, driven by issues of efficiency in both primary and secondary care facilities [4] . Hospital design is even more relevant for maintaining care quality in the face of space constraints, higher patient acuity, shorter lengths of inpatient stay and financial pressures. The operational challenges set by these agendas are substantial, and consideration should also be given to how these design variables might present, or prevent, opportunities for transmission of pathogenic organisms. Little data exist to inform how hospital design might impact on the potential for HCAI transmission [5] . With this in mind, built-environment experts, clinicians, microbiologists, and statisticians came together to examine possible relationships between defined elements of hospital design, behaviour and environmental contamination.

Data were analysed using SPSS 16.0 for Windows. Initial data analysis demonstrated the data distribution to be non-Gaussian. Accordingly, we used Spearman's Rho Product Moment test to determine the relationship, if any, between movements through various doors and microbial densities. We used one way ANOVA for least significant difference analysis to establish the significance of any difference between means. After correction for extreme values, we used the Pearson Product Moment test parametric analysis. We expressed results as means ± standard deviation. Values were considered significant for p values of less than 0.05.

Microbiological surveillance data were collected at the same time as handle usage using Tryptone Soy Agar (TSA) Rodac impression plates with a surface area of 16.7 cm 2 . We chose Rodac plates rather than a swabbing technique as it reduces variation relating to swab material type and swabbing technique. The plates were read after 48 hours' incubation for Total Viable Counts (TVCs). We sampled both door handles and door plates. These were cleaned thoroughly with 70% isopropyl alcohol wipes immediately before the start of the movement observations and swabs taken to ensure the handles and plates were free from bacteria. We repeated the sampling at the same sites following a 150 minute observation period. This was found to be sufficient for observing substantial door usage whilst practical for continuous observation by a single worker. We developed consistent sampling techniques whereby we sampled a 100 cm 2 area at the centre of the door push plates, or a rotation of the Rodac impression plates around the vertical centre of the fixed vertical door handles. This was repeated twice a day to straddle both morning ward rounds and afternoon visits by relatives, and for three days.

We watched where people moved to and from and recorded our observations. We were careful to allow a &#;run-in&#; period of sham observation of three weeks in order to minimise any bias which the observation process itself might trigger. A single movement was defined as one individual crossing the threshold of any gate as defined above and the locations of which are illustrated in . We monitored all movements through all gates in the three units on a daily basis from 10:30 to 13:00 and from 14:30 to 17:00. Individuals were assigned to one of several groups, namely staff local to the ward, other hospital staff, patients, and their visitors.

Doors with push plates always had a fixed pull handle on the other side. The direction of push or pull varied from door to door. Gates 4 and 6 were furnished with a pull handle to enter the unit, whereas Gates 5 and 7 used a pull handle to leave the unit. We observed staff and visitors for at least three days for all six gates. The doors at gates 1 and 10 had lever handles while the other four (Gates 4, 5, 6 and 7) were double leaf doors designed to be pushed on one side and pulled on the other. Accordingly, the doors we studied had three different designs: flat rectangular metal plates on the push side of the double doors, longitudinal fixed door handle bars on the pull side of the double doors and a short horizontal lever handle on both sides of gates 1 and 10. These different designs are shown in .

The company is the world’s best hospital door manufacturers supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

shows a plan of the units. Gates were defined as those thresholds across which individuals travel. Gate numbers were not consecutive, as some gates had no doors. Gates and doors (when present) were numbered using the same numbering system. Gate 1 identified the door connecting the HDU to the operating theatres zone; Gate 4 the main entrance to the SITU and HDU; Gate 5 the doorway to the main corridor separating SITU from MITU; Gate 6 the second entrance into the SITU; Gate 7 the main entrance to MITU, and Gate 10 one of the entrances to the only side room of MITU which opens directly into the main corridor. This side room could also be accessed through MITU.

This was an observational study of a nine-bedded surgical intensive therapy Unit (SITU), a newly refurbished four-bedded medical intensive therapy unit (MITU) with a side room, and a four-bedded high dependency unit (HDU), all located in close proximity to each other on one floor of a busy urban hospital. We obtained waivers from our ethics Committees for the work as the study neither involved patient contact, nor was disruptive to patient care. Studies were carried out in a six month period between and . We gathered information relating to ward layout, which way the doors into, out from, and within the units opened, how often they were used, by whom, the door handle design, and finally contamination density by potentially harmful microorganisms.

Traffic density heading either in or out of the doors was balanced and was not influenced by the door handle design. Analysis of individual and average TVCs for each type of door handle, however, revealed that bacterial load on pull handles was consistently higher than that on the push plates located on the other side of the door. This narrowly failed to reach statistical significance (p = 0.053). Further analysis relating to handle type revealed that lever handles had the highest ratio (6.38 TVCs/movement), followed by Pull handles (2.24 TVCs/movement), which were in turn nearly double that of the Push plates (1.20 TVCs/movement). Interestingly, the ratio of TVCs/movements on the lever handles located on the inside of the doors used to exit from the side room and HDU was much higher than the corresponding handle on the other side of the door ( ). The table also shows that pull handles had a higher ratio of TVC per movement than the push handles.

shows the considerable range of average TVCs retrieved from both sides of each door. We occasionally detected confluent or near confluent bacterial growth on door handles in the context of low levels of traffic (Gates 1 and 10). These exceptions can only be explained by less frequent contact with highly contaminated hands. When these heavily contaminated samples were excluded, a significant correlation between movement density and TVCs emerged (<0.01). Low traffic density was associated with low TVCs for Gates 1 and 10 and the more heavily used doors at Gates 4, 5, 6 and 7 were more contaminated. Further analysis of the pattern of contamination in the more heavily used doors indicated that other factors were contributing to microbial contamination.

Microbial growth from Gate 6 was on many occasions either confluent, or too numerous to count, as was one sample from Gate 5. There was little effect of sample timing on TVCs apart from Gate 6, where the afternoon samples were consistently found to be greater than 300 or were confluent.

We observed ward traffic for periods of seven consecutive days, during which there were no to four patients present in the four bedded HDU; five to seven patients in the nine bedded SITU; and three to four patients in the four bedded MITU. We recorded up to 241 movements across a gate in 150 minutes at a time when only six out of nine beds were occupied. Staff based on that ward were responsible for 50% of all movements through this particular gate. Accordingly, various staff members had to exit and/or enter the unit about 120 times over a two and a half hour period. displays the total number of movements according to category of building user over a seven day observation period. These data demonstrate large variations of traffic across doorways, which were related to location and time, but not direction. Ward and hospital staff generated the majority of these events. Movements through the main entrances to the ITUs (Gates number 4 and 5), constituted almost 47% of all movements.

Discussion

We found a relationship between how often and how many people cross door thresholds and the number of bacteria deposited on door handles. This finding supports the requirement for hand hygiene whenever hospital thresholds are crossed [7]. These critical moments in potential microbial transmission are increasingly recognised as targets for high impact interventions. We found that much traffic arose from the need to access the sluice room, offices, rest rooms, and separate equipment and storage areas.

Our results indicate that door location had an impact on contamination. For example, the handle used to exit the HDU via Gate 1, to access the operating theatres, was far more contaminated than the handle used the other way when adjusted for frequency of movement. This may be an indicator of ward activity, hand hygiene, or handle design. As expected, we observed a consistently high level of hand hygiene in the operating theatres and this may be the reason for the low level of contamination on the handle used to enter the HDU. In contrast, staff entering the theatre from the HDU (&#;out&#; handle) will likely have come into direct contact with high acuity patients in a less controlled environment and may have found it more difficult to maintain such high levels of hand hygiene compliance. This however may not be the full story. The average contamination per movement was highest at this gate and also at Gate 10, which connects a MITU side room with the corridor. This may relate to door handle design, as both gates were operated by lever handles.

Door handle design may also have contributed to the TVC/movement results for Gates 4,5 and 6. While the hand hygiene facilities were identical on both sides of these three gates, and the activity within the SITU would clearly be greater than outside the SITU, we always observed greater contamination on the &#;in&#; pull handle than the &#;out&#; push plate. Accepting the variables relating to activity, as discussed above, it is plausible that pull handles &#;capture' more organisms than push plates. We suggest that this relates to &#;skin to metal ratio&#; as illustrated in . It would seem logical that door handles that either &#;capture&#; a larger proportion of whatever hand contamination is present, concentrate what is captured onto a smaller surface area or both, is a reasonable explanation for our data. The pull handles require grabbing at some point along the vertical bar of the fixed handle, focusing the contact point on the handle and thus reducing the area and concentrating contamination to a small surface. The potential for concentrating microorganisms was even greater on lever handles, where the length of the handle bar is less than one quarter of that of the vertical fixed handle, thereby acting as a smaller lens focussing the microorganisms left behind on contact. Whilst a logical explanation for our findings, we cannot dismiss the possibility that door handle design had no influence on contamination and that sole determinants of contamination were ward activity and hand hygiene.

The design of the healthcare environment is increasing recognised for its impact on health care quality and outcomes [8]&#;[9]. To our knowledge there is no coordinated study of how people's behaviour is influenced by the built environment and how this relates to microbial spread [10]. We show here that a multidisciplinary approach both reveals the true complexity of microbial spread and the challenge this sets for effective strategies for its control. In the absence of a more &#;intelligently designed&#; built environment, recent focus on the near patient space [7] and alcohol based gels has been of great benefit. The WHO recommends undertaking hand hygiene when entering the patient environment. However as staff compliance with hand hygiene is routinely less than 100% [11], introduction of microbes into bed spaces is still a risk. Accordingly, optimising ward design to limit the risk of contamination, is still of value.

Optimising ward design to limit microbial spread is not straightforward and will be determined by many factors such as the existing building if not a new build, limitations on space, and use. In the setting described in this manuscript, we observed that closer, more accessible storage and supply rooms would have resulted in less time spent fetching, carrying and performing mandated handwashing. Closer storage would likely have limited the opportunities for cross contamination and releasing time for direct patient care. In some settings, closer storage of some ward related items may facilitate contamination with patients' flora and this could be undesirable. Whatever the physical and financial constraints and activity demands, we would advocate an informed approach to ward design/modification, to at least consider the implications for the potential for microbial spread. Of particular importance is the area within and around the sluice. We noted high contamination levels on Gate 6, which controlled access to the sluice room. This study did not set out to identify the bacterial species recovered from the door handles. We cannot therefore state whether these organisms were skin commensals, such as coagulase negative staphylococci, transiently carried S aureus/MRSA, or faecal organisms such as E coli. If the latter were predominant, it would indicate that the high levels of contamination emanated from the sluice. The sluice room represents a potentially problematic area where a door is desirable to help limit the spread of faecal organisms while also providing surfaces, such as the handles, which could facilitate organism transmission.

There are very limited data on door handles and their potential for microbial transmission. In a study looking at surrogate markers of nosocomial pathogen transmission, door handles were highlighted as one site that rapidly became contaminated within the context of a neonatal intensive care setting [12]. A recent study has shown that it is possible to reduce bacteria on door handles provided they are regularly cleaned. Even with regular cleaning, bacteria were detected on more than 20% of handles [13].

Cleaning, both of hands and the environment, has been widely accepted as an important factor in curbing the spread of pathogens in hospitals [14]. Our data indicate that, while cleaning is important, it is not always practical, as in some cases a single touch by a contaminated hand was sufficient to result in a confluent plate. A potentially innovative approach to limiting environmental contamination is the use of spontaneously antimicrobial surfaces. Of these, copper-based microfibre cleaning systems [15] or copper furnishings look particularly promising, although the latter are expensive and still in need of regular cleaning [16].

The layout of the units, variably and constantly contaminated by the sick patients they contain, can therefore support or undermine policies designed to limit the spread of infection as well as enabling healthcare staff to work more effectively. The use of automatic doors or the elimination of doors altogether could be a solution to reducing the dissemination of microorganisms acquired from door handles, although should be weighed up against the potential for airborne transmission and the importance of visually defined thresholds, themselves prompting hand hygiene. Our findings offer a possible explanation for Cepeda et al's surprising findings that side room use in the context of ICUs failed to reduce the rate of MRSA cross-infection [17]. This, however, is only one of a number of healthcare design features that could be considered to optimise effective delivery of care and control of healthcare associated infections.

Architects may not have the necessary information or knowledge available to inform optimal healthcare design as regards the spread of infection. Whilst door handle design may appear trivial at the design stage and largely ignored, it is one of many &#;trivial&#; design features that might silently undermine microbial transmission control. Novel door handles are being developed and may prove to be more &#;resistant&#; to microbial contamination than existing designs. The multidisciplinary approach taken in this study could serve as a paradigm for future healthcare design. A network of architects, engineers, microbiologists, nurses doctors and hospital administrators working together at multiple stages of the design process could achieve those efficiencies seen in car and kitchen design and manufacturing. These synergies between providers of healthcare and those responsible for the buildings in which it is delivered would seem essential for better, evidence based and optimal healthcare building design.

The entry door is the first line of defense. Without incredibly strong materials or a thoughtful design, your facility will be in danger.

It doesn&#;t matter if you run a warehouse, bank, hospital, education facility, or sports arena. You must look for these five important features in secure entry doors.

High-Quality Steel Doors

Steel doors indisputably outperform their counterparts when it comes to security aspects. Unlike wood and other metals, steel doesn&#;t crack, warp, or chip over time.

Their inherent strength poses a formidable barrier to any potential intruders. Its resilience makes it resistant to forcible entry, including attempts at drilling or kicking down the door.

Fortified Door Frame

A highly durable door isn&#;t secure without a reinforced door frame. For maximum security, you will want to install a frame made of steel.

Steel isn&#;t susceptible to termite damage or rot like the average wooden frame. Not to mention, it&#;s the second strongest metal on the planet. As the door and door frame function in conjunction, it will be nearly impossible for threats to break in.

Reliable Locking Mechanism

Choosing the right locking mechanism can significantly amplify the security level of your entry doors. High-security deadbolt locks with complex pin configurations are also a reliable choice. They are resistant to lock bumping or picking, providing a robust layer of security to your door.

Another option is smart locks. You can control them remotely through an application for enhanced convenience. You can monitor the door and control the locking mechanism from anywhere when necessary.

Reinforced Glass

Most glass doors provide an easy way for criminals to break into facilities. After smashing the glass, the door handle becomes easily accessible.

Metal security doors often include glass components for aesthetics. It allows natural light to flow in the building and breaks up the solid sturdy panel. However, manufacturers typically reinforce this glass to keep up with the metal door&#;s resilience.

Laminated glass consists of two or more layers of glass, sandwiching a robust, plastic interlayer. The interlayer holds the layers of glass together to prevent shattering upon impact.

Another technique is the use of tempered glass. The glass undergoes a heat treatment process to enhance its strength; this process involves subjecting the glass to high temperatures followed by rapid cooling to create glass that&#;s durable and resistant to breakage.

Fire Rating

Facilities are always at risk of sparking fires and destroying everything in their path. A fire can happen in a warehouse, an apartment complex, or a hospital facility. People can suffer from burns and smoke inhalation, while the building endures equally significant damage.

Manufacturers designed these doors to combat combustion for 30 to 60 minutes. Installing a fire-rated metal door is a great way to prevent the rapid spread of flames and smoke, minimize damage, and give everyone more time to evacuate.

High-quality commercial doors for exteriors are hard to come by. That&#;s why the Door and Fence Store only offers the best of the best for your facility. Each of the five important features to look for in secure entry doors is readily available with our incredible selection. Call or visit us in-store or online to learn more about what we provide to ensure you receive the ultimate effective design.

Want more information on what is high pressure laminate? Feel free to contact us.