What does TC mean on an oil seal?

We offer quality sealing and cost-effective oil seal designs that help keep equipment running longer while reducing downtime. Through our comprehensive selection we provide oil seals with short lead times and with a variety of designs for use in many common and more challenging industry applications. When selecting an oil seal, it is important to know what sort of design is needed, and we have outlined a few of the more common elements below.

For more brown tc rubber oil sealsinformation, please contact us. We will provide professional answers.

Shop for Oil Seals

Standard Sealing LIP Designs

Our oil seals have many different available lip designs, with some being simple and others complex, due to their special application. However, the most common industry lip standards are described below:

• (single lip):  This design uses a garter spring and generally seals against internal media in lower pressure applications.  The single lip is not recommended for use in applications in which the environment contains dirt or contaminants.
• (double lip): This design is also used with a garter spring and consists of a primary lip for sealing against internal media in lower pressure applications.  The secondary (also known as the auxiliary lip) provides additional protection from dust and dirt.
• (dual or twin lip):  This design consists of garter springs and two identical primary lips that are usually used to separate two liquids. The space in between these two lips must be lubricated with grease or something similar.
• (single lip):  This design has NO spring and is generally used for sealing a non-pressure medium, such as grease or protecting against dirt.
• (double lip): This design has NO spring and is generally used for sealing a non-pressure medium, such as grease and is used to protect against dirt as well as internal and external media.

Standard Sealing CASE Designs

We offer oil seals in many various case designs from the most simple to the most challenging applications. Below are just a few of the most commonly used case designs for most sealing applications:

• Type A: Outer metal case with a reinforced plate for structural rigidity. This design is mainly used on shafts when the diameters exceed 150mm, smaller shafts that need extra strength, or when used with special rubber compounds.
• Type B: Outer metal case that is mainly used on shafts with diameters under 150mm with bore housing materials made of steel or cast iron. This design provides a firm and accurate seal in the housing; but may limit the static sealing on the outer diameter (O.D.).
• Type C: Rubber covered metal case that can be used on any size shaft. The rubber helps prevent the metal from rust & corrosion, and prevents damage during assembly. This design is used in soft alloy, plastic housing materials, and for replacement in environments where there is minor damage to the housing surface.

Metal Case Finishes & Treatments

Oil seals with outer metal cases may include finishes or treatments that are applied to the outer edge to aid in rust protection, identification, and sealing of scratches or imperfections in the housing bore. Common finishes applied to the outside edge of metal O.D. oil seals include: Plain (a bonding agent that is usually a yellowish-green color), a Color Painted edge, and a grinded-polished edge.

Oil Seal Style Selection (Common Types)

Combining both the lip and case types explained above, it is easy to assemble the Global O-Ring and Seal (GOR) types as indicated in the following examples:

Type SC: Single lip w/spring, rubber covered O.D.
Type TC: Double lip w/spring, rubber covered O.D.
Type SB: Single lip with spring, metal O.D.
Type TB: Double lip with spring, metal O.D.
Type SA: Single lip w/spring, reinforced metal O.D.
Type TA: Double lip w/spring, reinforced metal O.D.

Factors in Oil Seal Selection

Our oil seals are available in both inch and metric sizes and are selected as follows:

• Type: Combination of lip design and case type.
• Shaft Diameter: The outside diameter of the shaft where the seal will operate (sometimes referred to as the I.D. of the oil seal)
• Bore Diameter: The inside diameter of the bore housing where the seal will operate (sometimes referred to as the O.D. of the oil seal)
• Width (or Depth): The depth of the bore (also known as the width or height of the seal). Note: When the width of the seal is not strictly specified, the depth of the bore is usually made big enough so a seal might be replaced by a wider one.
• Sealing Lip material
• Any special materials or considerations, such as stainless steel for the case and/or spring
• Any special treatment or finish such as painted, polished edge, etc.

Oil Seal Designs From Global O-Ring and Seal

Global O-Ring and Seal offers a full line of oil seal designs in all industry standard sizes. If you are a distributor or purchaser who may have need for our oil seal products, contact us today to speak with one of our technical sales associates, request a no-obligation quote, or place an order online from our extensive inventory.

Shop for Oil Seals

Did you miss the first part in our series? Be sure to click here to read part one.

     The commonly used oil seal forms are TC, SC, TB, SB, TA, SA. Many people are not particularly familiar

 

with the two types of TF and SF oil seals. Let’s talk about the four types of TC/SC and TF/SF below. Oil seal.

 

     First of all, these four types of oil seals belong to a type of skeleton oil seals. They all belong to the inner-wrapped

 

skeleton oil seals, and their movement methods are all rotary types.

 

1, TC type

 

TC type oil seal is the most commonly used oil seal form in modern industry. TC is an inner frame and outer

 

rubber double lip frame oil seal. In some places, it is also called a lip seal. T stands for double lip and C stands for

 

rubber coated. The main lip of the double-lip skeleton oil seal is used to prevent oil, and the secondary lip

 

is used to prevent dust.

The company is the world’s best round flat rubber gasket price supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

 

2, SC type

 

SC type oil seal is a single-lip outer rubber skeleton oil seal. Compared with TC type, it lacks a dust-proof lip,

 

which is suitable for sealing in a dust-free environment.

 

3, TF type

 

TF oil seal is not a particularly common type of oil seal in daily sealing equipment, because it belongs to

 

the rubber-covered iron shell type oil seal. Generally, the cost of this type of oil seal is much higher than that of

 

the TC type. It is more commonly used in corrosive environments. The oil seal carbon steel shell skeleton is not

 

resistant to corrosive environments, so it is necessary to cover all the oil seal iron shell skeleton with specific

 

corrosion-resistant rubber to protect the oil seal skeleton so that corrosion will not occur. Generally, TF type

 

oil seals They are all made of fluorine rubber and stainless steel springs, so that they can be used for a long time

 

in high temperature and corrosive environments.

 

4, SF type

 

The SF type is the same as the TF type oil seal, which is a rubber full-coated steel skeleton type oil seal.

 

The difference between SF and TF is that SF is a single-lip seal suitable for dust-free environment, while TF

 

is a double-lip seal, which is dustproof. Also oil-proof.

Want more information on coloured rubber o rings? Feel free to contact us.