How to Select Right Material for Wetted Parts of a Slurry ...
How to Select Right Material for Wetted Parts of a Slurry ...
The most crucial parts for a slurry pump are wet parts. The main material for wet parts are Alloy metal, natural rubber, ceramic, polyurethane, etc. When you purchase a slurry pump, do you know what kind of material for the wet parts for your pump?
Please visit our website for more information on this topic.
The selection of the wetted parts material of a slurry pump depends on several factors, including the type of slurry being pumped, the pH of the slurry, the temperature of the slurry, and the abrasiveness of the solids in the slurry.
Common materials used for the wetted parts of slurry pumps include high chrome alloys, rubber, and various types of plastics. It is important to consult with the manufacturer or a pump expert to determine the best material for the specific application.
They will also be able to guide you on the trade-offs between cost, wear resistance, and corrosion resistance for different materials.
If you are not able to determine what material you should select, contact our professional engineers, they will choose the right material as per your application.
Link to SHANGLISHI
Additional reading:Types of Hydraulic Fittings: Understanding Types, Uses ...
Slurry Pumps Support
Unlocking 370047a: Key Insights and Tips
Transform Your Workshop: Customize Bamboo Stick Machine
First, check what type of gland is fitted to the pump &#; this is important, as adjustment can have a reverse effect when tightening the bolts versus loosening them. For example, in an H gland, tightening increases the flow; in a G gland loosening increases leakage.
The gland has been set up in the factory to leak at startup to prevent burning up the gland.
With water-purged glands (H and P types), check the gland water pressure, which should be 5 psi above duty pressure. If the pressure is too high, put a pressure regulator in the line.
Referring to the manual, adjust the gland when pumping water only. Allow a little excess leakage at this time.
When the plant is at operational tonnage, re-adjust the gland to a drip every 10 seconds.
If you want to learn more, please visit our website Slurry Pump Wet Parts Factory.